Question / Help Cannot get HD quality with whole screen capture ?

StealthyNinja

New Member
Heres the deal.. I want my stream to capture my whole screen while being at 720P...
My monitor is 1680x1050 and I cant get it to work somehow!!!
Please help ;)

I`ll have my stream at 1280x720P custom base resolution in video settings and it only captures part of my stream and not HD I think.!
 
Last edited by a moderator:
Log analyzer ?

Aero is disabled

Aero seems to be disabled, consider enabling it unless using monitor capture.

Faster preset in use

You have changed the default preset to superfast. The default of veryfast is designed for the optimum balance of quality and CPU usage. Using superfast will result in greatly reduced quality. If possible, try to change other things such as lowering the resolution or FPS before modifying the preset.

Bad resolution / FPS / bitrate combination

The combination of settings you are using will likely lead to a low quality stream with artifacting and other problems. Consider either raising your bitrate or lowering your resolution / FPS (qval: 0.021)

3 issues found (1 major, 2 minor).

Also file ?

If you get any solutions ill be happy to try it out since I am going out for a bit to the hospital to get my broken foot checked out cya later. ;)
 

Attachments

Last edited by a moderator:
Well, first of all, 1680x1050 doesn't downscale to 1280x720, because its not the right ratio (16:10 instead of 16:9), and because 720 is between the 1.25 and 1.5 downscales. You should just use the 1.5 downscale and stream at 1120x700.

Second:

16:48:47: Video Encoding: x264
16:48:47: fps: 24
16:48:47: width: 1344, height: 840
16:48:47: preset: veryfast
16:48:47: profile: main
16:48:47: keyint: 48
16:48:47: CBR: yes
16:48:47: CFR: no
16:48:47: max bitrate: 2200
16:48:47: buffer size: 2200
16:48:47: ------------------------------------------
16:48:49: Using RTMP service: Twitch / Justin.tv
16:48:49: Server selection: rtmp://live-lhr.justin.tv/app
16:48:49: Interface: RT73 USB Wireless LAN Card (802.11, 54 mbps)
16:48:50: Completed handshake with rtmp://live-lhr.justin.tv/app in 357 ms.
16:48:50: SO_SNDBUF was at 8192
16:48:50: SO_SNDBUF is now 65536
16:48:54: RTMPPublisher::SocketLoop: Increasing send buffer to ISB 131072 (buffer: 0 / 297984)
16:48:55: RTMPPublisher::SocketLoop: Increasing send buffer to ISB 262144 (buffer: 0 / 297984)
16:59:42: Total frames encoded: 15715, total frames duplicated: 3783 (24.07%)
16:59:42: Total frames rendered: 15592, number of late frames: 93 (0.60%) (it's okay for some frames to be late)
16:59:42: RTMPPublisher::SocketLoop: Graceful loop exit
16:59:44: Average send payload: 8124 bytes, average send interval: 27 ms
16:59:44: Number of times waited to send: 0, Waited for a total of 0 bytes
16:59:44: Number of b-frames dropped: 0 (0%), Number of p-frames dropped: 0 (0%), Total 0 (0%)
16:59:44: Number of bytes sent: 190135933


This is the only time I could find in your log that you streamed for more than just a few seconds.

In order to properly test your computer's streaming capabilities, you need to log at least five minutes of the fastest action your game has to offer. All your other streams in that log that I saw were too short.

You need to keep CFR set to Yes... i.e. keep it checked on.

And your CPU isn't keeping up. You can tell by your duplicated frames being 24%. That's really bad. You want your duplicated frames to be 1% or less for a smooth stream. What are you streaming? I would normally expect your CPU to perform a bit better than this.

Since you're using graphics capture, not monitor capture, do as the Log Analyzer said and turn on Aero. This by itself may solve your problem. If not, increase your downscale to more than 1.5, to something like 2.0.

Finally you're using a wireless connection. This is really bad for sending live-streaming video. You want to hard-wire your computer. If you can't, then you want to make sure absolutely no one and nothing is using the wireless other than you while you're streaming. Turn off all other wireless devices. But the best way is to run a network cable between your internet router and your computer.
 
Well here you go I streamed for a bit on a game which needs quite a good PC so here`s the log the game I streamed was vindictus at the highest settings and I am trying to stream LoL so here you go the log.
 

Attachments

This time you used monitor capture with Aero. Go back to the way you were capturing before, with aero. Or use monitor without aero. But the former is better than the latter, both of which are better than both ways you've done it so far.
 
For some reason during playing the stream skips parts.

This is really the best I have got the stream at but on the stream it skips... IDK why. This has to be the log I think...
 

Attachments

Last edited by a moderator:
Well, you aren't dropping any frames, and you've pretty much eliminated your late frames. Duplicated frames are mostly ok, especially if you are pushing your system to the max and the game itself dips below the target framerate occasionally, causing OBS to duplicate frames in order to stay at the target encoding FPS. Close to 6% is a tad more than I would usually like to see, but if you were specifically overtaxing your PC, then it should be fine for "normal" usage. League of Legends isn't exactly very system intensive.

Now, if the "skipping" you are talking about is buffering while trying to watch your stream, then unfortunately this is an issue with you not being able to download the stream from the Twitch server fast enough for...any number of reasons. You were dropping hardly any frames at all, not even enough to cause noticeable skipping. So, unfortunately if you are buffering, it's a viewing issue, and the only way you can resolve it on your end is to keep lowering the bitrate until it stops.

Couple side notes when it comes to bitrate:
Always make sure to keep the buffer size the same as the bitrate, there is almost no circumstance where a custom buffer would be required for normal streaming.
If you do have to drop below 2000 bitrate to eliminate viewing lag, consider downscaling even more. For LoL, 1120x700 at 30FPS should look fine at even 1500 bitrate, but if you have to go much lower than that, you're definitely going to want to downscale another step or two.
 
Right so I have stopped the skips but the stream seems a bit laggy and there are black borders in my screen resolutoin 1680x1050 or in an aspect ratio of 16:9 it only shows a part of whats goin on, on my screen here is the latest log xD
 

Attachments

Last edited by a moderator:
Well, in that log file you tried all kinds of resolutions. First of all, your monitor uses a 16:10 resolution. So small black borders on top and bottom would be normal. Second, if you change the base resolution in OBS by hand, you have to fit your sources to the new size. So its normal that when you changed to 1280x720 for example, that only a part of your 1680x1050 input was shown.

I personally would recommend to keep the base resolution at 1680x1050 and just use the downscale dropdown to lower the res that you dont get lags anymore. If you really want to use a 16:9 res for your stream. Set the base resolution back to 1280x720 and downscale on 0. Then fit all your sources to the scene. There will be black on top and bottom, so you can then either stretch your source a tiny bit to fit into 16:9, or, what I would prefer, just add a border graphic, text, twitter link, or whatever to the black area.

https://obsproject.com/forum/resources/how-to-select-the-correct-resolution-aspect-ratio.13/
 
Well im gonna test stream for my games and see if you can get anything else to help out and any feedback please <3 :D

Wont speak though..
www.twitch.tv/neku66

http://www.twitch.tv/neku66/b/520702131 watch this at around 12 mins the GUI is flashing for some reason IDK why and how do I fix this ? gonna improve quality also looks crappy atm. Also sound quality isn`t too great how do I improve this ? Log also. :D
 

Attachments

Last edited by a moderator:
Using monitor capture with a full screen game will cause flickering. Don't use monitor or window capture if the game you're capturing is running in full screen. It needs to be switched to windowed or borderless windowed mode first.
 
On your system more compression will probably be too much for the CPU, so the best way is to increase the bitrate or lower the resolution.
 
Back
Top