Crackle and Pop's in the first ten minutes of my recordings

Raktus

New Member
I was doing some recording today, and at the start of everything I recorded, I noticed some strange crackling noises I never picked up in a recording before. It almost sounds like rubbing on the mic, but I checked the video and nothing ever touches the mic. It's a headset mic with a pop filter on... It's a set up I've used for years with no changes to the headset or it's location. It's not loose anywhere I can see, nor is the foam pop filter moving. I should also mention that this happened in the first 10 minutes of about three recordings I did today, but didn't in the last 30 minutes of the same three recordings. Would anyone know what the cause might be and/or how to fix it?

 
1. You are running an old version of OBS Studio (30.0.2). Please update to the newest available version by going to Help -> Check for updates in OBS or by downloading the latest installer from the downloads page and running it.
2. Make sure that your plugin is compatible with the newest available version of OBS and is up-to-date.
3. Create a new Scene Collection with just an Audio Input Capture device. No filters, nothing else.

If still having issue, provide a new log.
 
obs_graphics_thread

max = 1361.98 ms
This is a monitor stall. OBS should have at least 1 ms or less. However...

lagged frames due to rendering lag/stalls: 2
This is only two dropped frames. Something definitely froze.

That was in regards to the monitor. But for the audio:

My first thought is.....because I have a Realtek Audio and they put their chips in almost every motherboard....is Realtek Audio Initialization.

Why?

14:05:15.518
WASAPI: Device 'Microphone (Realtek(R) Audio)' [48000 Hz]

14:05:15.545
adding 42 milliseconds of audio buffering,
total audio buffering is now 42 milliseconds
(source: Mic/Aux 2)

If there is a way that you can get new audio hardware that is not attached to your motherboard, the better. For example, I use my monitor's audio.

Your Desktop audio and Microphone has some strange timing variation. OBS is already sychronizing them both. Make sure that Timestamps are unchecked.

OBS detected a timing variation:
adding 42 milliseconds of audio buffering

This happened to me because the devices are using Timestamps (HPET) and it will cause a ton of strange audio issues.
 
1. You are running an old version of OBS Studio (30.0.2). Please update to the newest available version by going to Help -> Check for updates in OBS or by downloading the latest installer from the downloads page and running it.
2. Make sure that your plugin is compatible with the newest available version of OBS and is up-to-date.
3. Create a new Scene Collection with just an Audio Input Capture device. No filters, nothing else.

If still having issue, provide a new log.
I just updated today. I was holding off because I tend to encounter issues when I do the update, but guess I had no choice now that I'm having issues anyways. I also checked up updated all my drivers that had an update. When you say 'create a new scene collection with just an audio input', how do you mean? Just the mic and audio sources without a filter? I removed the filter I had on the desktop audio, frankly not even sure why that was there.
 
obs_graphics_thread

max = 1361.98 ms
This is a monitor stall. OBS should have at least 1 ms or less. However...

lagged frames due to rendering lag/stalls: 2
This is only two dropped frames. Something definitely froze.

That was in regards to the monitor. But for the audio:

My first thought is.....because I have a Realtek Audio and they put their chips in almost every motherboard....is Realtek Audio Initialization.

Why?

14:05:15.518
WASAPI: Device 'Microphone (Realtek(R) Audio)' [48000 Hz]

14:05:15.545
adding 42 milliseconds of audio buffering,
total audio buffering is now 42 milliseconds
(source: Mic/Aux 2)

If there is a way that you can get new audio hardware that is not attached to your motherboard, the better. For example, I use my monitor's audio.

Your Desktop audio and Microphone has some strange timing variation. OBS is already sychronizing them both. Make sure that Timestamps are unchecked.

OBS detected a timing variation:
adding 42 milliseconds of audio buffering

This happened to me because the devices are using Timestamps (HPET) and it will cause a ton of strange audio issues.
I've never had timestamps turned on, as it's usually been the first thing people have advised me to turn off for any problem. My monitors aren't something I could plug my headset into, lol. I don't know what could be causing that timing variation though.
 
Alright, I updated OBS, updated all the drivers on my computer... made a new scene with just desktop audio and my mic, no filters. Opened OBS for a while before I started recording. Started recording 6 minutes before I ever said anything. When I started speaking, in the recording, crackling and popping again. I should also note that I also do recordings with a co-host, and those never have the crackling or popping. Just my solo recordings.

 
Back
Top