Question / Help How can I salvage my recording? OBS Studio Stuck at "Stopping Recording"!

cr15ti_1503

New Member
Long story short, I've been recording my audio using OBS studio (because the noise reduction filter is way better than Audacity's) and the video using Raptr.
The video came out fine.

The problem is OBS is now stuck at "Stopping Recording". I always had this problem no matter the settings used, be it advanced or default. What the hell is going on? How can I fix it and how can I salvage the recording?

Log file is attached to this thread.

ps: I have only set the recording to capture audio, not video.
 

Attachments

As far as I know if the output for the recording is .mp4 and OBS crashes the output is trashed. There are some recovery programs but these aren't cheap. What output format are you exporting to? if its .flv i think that can be recovered easier.

checking the log and i'm not that experianced in debugging it so someone might be able to pin point it better but you are getting alot of

Number of skipped frames due to encoding lag: 315 (72.1%)
&
Number of lagged frames due to rendering lag/stalls: 128 (22.0%)

errors, so check your bitrate as this could be to high, try it very low like 3000 see if its ok then and then start to move it up
 
Encoding lag and rendering lag/stalls have somewhere between nothing and 0 to do with bitrate.
 
@Beardedbob the encoding and rendering lag shouldn't be a problem as I only recorded the audio (specifically, the microphone only). No Video Source was used at all so if anything that's a fault in the program, not my end.

On top of that, it seems that whenever I record in 1080p 60 fps the video stutters heavily. I've no idea why this happens and I've tried all the settings possible.
Using Raptr in any game yields perfect results at max 1080p60fps, it's just that I don't have a noise reduction / noise gate filters that come with OBS.

Btw my specs are:

7870 ghz edition 2gb
8GB ddr3
i5 3450
 
What happens when you try to record audio AND video with obs and leave raptr completely out of the process?
 
The video turns out laggy, even with a smooth 60 fps gameplay. I tried both Simple Settings and Advanced ones (with both x264 and h264 AMD VCE).
The best outcome I had so far was :
-Video Tab Base Canvas Resolution 1080p
Output Scale Resolution 720p
Downscale Filter: didn't matter
Common fps didn't matter
And with the rescale back to 1080p in the Output Tab.
The problem with this is that it also had stuttering during scenes with fast movement (like turning around quickly)

So yea.....OBS video recording doesn't work for me at all.
 
Encoding lag and rendering lag/stalls have somewhere between nothing and 0 to do with bitrate.

Although it might not be specifically related to bitrate its certainly looking to be part of the issue.

What happens if you use a different audio gate / noise reduction filter program? e.g. reaper? it could be a conflict between Raptr and OBS + OBS will use more CPU than say Reaper.
 
try simple output mode, indistinguishable recording quality software low cpu use.

Although it might not be specifically related to bitrate its certainly looking to be part of the issue.
I highly doubt it given that encoders don't magically do more or less work based on the bitrate you give them.
 
@beardedbk
I will give Reaper a try. The thing is I don't know any other program that applies noise reduction / gate DURING the recording process. I've tried audacity before, but I don't like it's noise reduction filter. OBS handles it perfectly without the need of post-recording editing.

@Harold

I tried using those settings. If it detects fast movement speed it starts stuttering so bad, at some point it just freezes on one image....
This time I used it on a game that ran on 30+fps. At the beginning it goes smooth for a few seconds, but afterwards fails badly.

Edit 3:
Ok so if I move slowly and don't turn too fast, the recording goes smooth-ish, with smaller hiccups here and there.
 
Last edited:
Then, simply put, your computer isn't up to the task when it comes to using OBS.

Do you have an obs log from the attempt using the simple output mode settings?
 
The video turns out laggy, even with a smooth 60 fps gameplay. I tried both Simple Settings and Advanced ones (with both x264 and h264 AMD VCE).
The best outcome I had so far was :
-Video Tab Base Canvas Resolution 1080p
Output Scale Resolution 720p
Downscale Filter: didn't matter
Common fps didn't matter
And with the rescale back to 1080p in the Output Tab.
The problem with this is that it also had stuttering during scenes with fast movement (like turning around quickly)

So yea.....OBS video recording doesn't work for me at all.

What x264 cpu preset are you using and bitrate?
 
What x264 cpu preset are you using and bitrate?

At the time of this thread's creation I was using Superfast / Ultrafast presets with 50k bitrates. I also tested with 20k bitrate, but it looked messy.
In the meantime I'm upgrading every driver I can and I'll be posting a new log and results.
 
You MIGHT be able to get 30fps to look decent, however no man's sky is known to be poorly optimized and is likely taking up enough system resources on its own that OBS doesn't have any available to it.

Another thing that may help is enabling vsync in the game.
 
The thing is I can Run No Man's Sky at about 35+ framerates constant, with ups to 50 in space. But I ran no man's sky as an example. If I run dota2 at 120 fps the video will also be shit.
 
Which basically proves my point. NMS isn't able to even render at 60 on your computer which means your settings in the game are too high and running dota2 uncapped lets the game engine eat as much cpu as it wants not just what it needs.
 
Device 'Headphones (High Definition Audio Device)' invalidated. Retrying
Device 'Microphone (High Definition Audio Device)' invalidated. Retrying
[WASAPISource::TryInitialize]:[Headphones (High Definition Audio Device)] Failed to activate client context: 88890004
[WASAPISource::TryInitialize]:[Microphone (High Definition Audio Device)] Failed to activate client context: 88890004

Cause the ...stuck at "Stopping Recording", I think. Problems with Audio Devices.

For recording mp4 with OBS Studio, I recommend to use fragmented mp4, Stopping Recording...

... at 120 fps the video will also be shit.
You don't need such high rates for quality or success. What quality level you need?
 
Back
Top