Title: Blurry Twitch Stream at 1080p60 – AMD RX 9060 16GB – Need Help with OBS Settings

tharvyl

New Member
Hello everyone,

I'm looking for help optimizing my OBS settings for streaming World of Warcraft Classic on Twitch at 1080p60.

My main problem is that the stream looks blurry, especially when the camera or character moves. I'd like to achieve the cleanest possible image with minimal blur and pixelation during movement.

My PC specifications:

  • GPU: AMD Radeon RX 9060 16GB
  • CPU: Intel Core i5-10500F
  • RAM: 16GB
  • Monitor: 1920×1080 at 144Hz
  • Internet upload speed: 150 Mbps
  • Streaming platform: Twitch
  • Game: World of Warcraft Classic
My current OBS setup:

  • Base resolution: 1920×1080
  • Output resolution: 1920×1080
  • Frame rate: 60 FPS
  • Encoder: AMD HW H.264 (AVC)
  • Rate control: CBR
  • Bitrate: 6000 Kbps
  • Keyframe interval: 2 seconds
I'd appreciate advice on these questions:

  1. Are these settings suitable for 1080p60 Twitch streaming, or would you recommend a different resolution or frame rate for better image quality?
  2. Which AMD H.264 encoder settings and preset should I use?
  3. Could changing the profile, B-frames, or other advanced encoder options help reduce blur?
  4. Is the main issue likely to be the 6000 Kbps bitrate, particularly during movement?
  5. Are there any OBS settings or AMD-specific optimizations I should try?
My upload speed is 150 Mbps, so I'm mainly looking to improve image quality rather than network performance.

I can provide my OBS log file and screenshots of my current settings if needed.

I'd appreciate specific recommendations for my hardware and Twitch, especially from anyone who has managed to get a clean 1080p60 stream without excessive blur or pixelation.

Thanks in advance!
 
1. Change the refresh rate on your monitor from 144 Hz to 120 Hz.
2. Change the Video Common FPS Value from 60 to 30 (more bits per frame).
3. Tools > Auto-Configuration Wizard > select "Optimize for streaming, recording is secondary", [Next] and follow the remaining steps. Once it's done, DO NOT CHANGE ANYTHING, close and restart OBS and try with those settings.

If still having issues, provide a log from that streaming session.
 
1. Change the refresh rate on your Samsung monitor from 72 Hz to 60 Hz. Leave them both at 60 Hz for now.
2. In Windows, we recommend that "Game Mode" be enabled. Game Mode can be enabled via the Windows "Settings" app, under Gaming > Game Mode.
3. The Hardware-accelerated GPU scheduling ("HAGS") feature in Window is currently known to cause issues with OBS, games and overlay tools. We recommend disabling it via this screen or these instructions. Be sure to restart after disabling it.
4. Your GPU is maxed out and OBS can't render scenes (0.1%) and encode frames (0.1%) fast enough. Running a game without vertical sync or a frame rate limiter will frequently cause performance issues with OBS because your GPU will be maxed out. OBS requires a little GPU to render your scene.

Enable Vsync or set a reasonable frame rate limit (60, 30) that your GPU can handle without hitting 100% usage.

If that's not enough you may also need to turn down some of the video quality options in the game. If you are experiencing issues in general while using OBS, your GPU may be overloaded for the settings you are trying to use.

Please check our guide for ideas why this may be happening, and steps you can take to correct it: GPU Overload Issues. Do not ignore service bitrate limits and try limiting the Maximum Video Tracks to 4.

Please also be aware that the log contains an Auto-Config Wizard run. Results of this analysis can be inaccurate. If still having issues, please post a link to a clean log file.
To make a clean log file, please follow these steps:

1) Restart OBS as Admin.
2) Start your stream for at least 30 seconds. Make sure you replicate any issues as best you can, which means having any games/apps open and captured, etc.
3) Stop your stream.
4) Select Help > Log Files > Upload Current Log File. Send that link here.
 
Last edited:
1. The Hardware-accelerated GPU scheduling ("HAGS") feature added in Windows is currently known to cause performance and capture issues with OBS, games and overlay tools. If you are having issues with performance or OBS freezing, we recommend disabling it via this screen or these instructions as a troubleshooting step. Be sure to restart your computer after disabling HAGS.
2. Your GPU is maxed out and OBS can't render scenes (0.2%) and encode frames (0.2%) fast enough. Running a game without vertical sync or a frame rate limiter will frequently cause performance issues with OBS because your GPU will be maxed out. OBS requires a little GPU to render your scene.

Enable Vsync or set a reasonable frame rate limit (60, 30) that your GPU can handle without hitting 100% usage.

If that's not enough you may also need to turn down some of the video quality options in the game. If you are experiencing issues in general while using OBS, your GPU may be overloaded for the settings you are trying to use.

Please check our guide for ideas why this may be happening, and steps you can take to correct it: GPU Overload Issues. The 1080 and 720 streams are still at 60 FPS. Go to Settings > Video > Change the Common FPS Values from 60 to 30.

You can also try adding a static border to your scene to allocate more bits to dynamic content.
 
1 thing you can do as well is, go to file -> settings -> Stream -> use streamkey and look down, there is box "ignore streming service settings" tick that box and use 8000bitrate
 
Provide a new log with the recommended settings (do not ignore steaming service bitrate) and link to stream.
 
Last edited:
Back
Top