Warmuptill
Active Member
Unfortunately, I am not able to reproduce this issue.
Which version of the plugin are you using?
Can you share the macro which is causing the issue?
Do you have a log file of the issue with verbose logging enabled?
- Thread starter Warmuptill
- Start date
Which version of the plugin are you using?
Can you share the macro which is causing the issue?
Do you have a log file of the issue with verbose logging enabled?
Héraès
Member
I downloaded the last version of the plugin for testing purpose, and still have the problem.
My OBS version is 30.2.3 (x64).
I've created a brand new macro to test, and still have the problem (even by manually clicking on a scene instead of using my DIY deck).
How can I have the log ? Where ?
My OBS version is 30.2.3 (x64).
I've created a brand new macro to test, and still have the problem (even by manually clicking on a scene instead of using my DIY deck).
How can I have the log ? Where ?
Warmuptill
Active Member
You can enable verbose logging by using the instructions from the wiki:
Troubleshooting
An automation tool for OBS Studio. Contribute to WarmUpTill/SceneSwitcher development by creating an account on GitHub.
github.com
You can access the log file from the OBS "Help" menu:
Hey there I'm kind of new to Advanced scene switcher.
I'm using OBS to digitize home videos. What I am needing to do is split the video recording at specific time intervals.
Example: 5 minutes for the first part, 10 minutes for the next, and so on.
I didn't find a straightforward way of doing this so I set up a chain of macros that will start a timer countown and split the video then trigger the next timer when done. seems fine... except if there's a blue screen or fuzz in between for 20 seconds I don't want that recorded.
Simple enough it seems as theres an "IF" matches pattern [blue screen] ... okay... except I also want to pause the timer countdown not just the recording... otherwise the timer is now still counting while recording is paused.
the pause functions in the macros just seems to pause the macro itself... not pause the timer in the macro. Is there a way to do this?
I'm using OBS to digitize home videos. What I am needing to do is split the video recording at specific time intervals.
Example: 5 minutes for the first part, 10 minutes for the next, and so on.
I didn't find a straightforward way of doing this so I set up a chain of macros that will start a timer countown and split the video then trigger the next timer when done. seems fine... except if there's a blue screen or fuzz in between for 20 seconds I don't want that recorded.
Simple enough it seems as theres an "IF" matches pattern [blue screen] ... okay... except I also want to pause the timer countdown not just the recording... otherwise the timer is now still counting while recording is paused.
the pause functions in the macros just seems to pause the macro itself... not pause the timer in the macro. Is there a way to do this?
Last edited:
Warmuptill
Active Member
Thanks I'll try this again... maybe I wasn't doing it right but it didn't seem to execute the command the first time I tried it
That seemed to have worked!
I was trying to use the "Pause" "Toggle Pause" but that unchecks the macros...
New topic:
I am experiencing 2 issues I've noticed with advanced scene switcher.
#1... The window will remember it's position but it will not remember it's Size
#2... It seems after editing some macros they will not function unless I close OBS and restart it, Specifically I have been setting timers and Recording duration
I was trying to use the "Pause" "Toggle Pause" but that unchecks the macros...
New topic:
I am experiencing 2 issues I've noticed with advanced scene switcher.
#1... The window will remember it's position but it will not remember it's Size
#2... It seems after editing some macros they will not function unless I close OBS and restart it, Specifically I have been setting timers and Recording duration
Warmuptill
Active Member
Just to confirm:
You have the corresponding setting enabled on the General tab, right?
If so, which version of the plugin / OBS / OS are you using?
Can you please export the macro you are experiencing this issue with?
Could it be that other macros are interfering?
It might be worth having a look at this wiki page to narrow down what the problem might be.
Troubleshooting
An automation tool for OBS Studio. Contribute to WarmUpTill/SceneSwitcher development by creating an account on GitHub.
github.com
Héraès
Member
@Warmuptill : I swear I went into this folder at the time of our conversation and saw no log, but this time I found ones.
Line 100 of the first file for example, there is :
By the way I add a precision to my last bug report : it's not just only the "If scene has changed" but the whole "Scene" feature that bug as soon as I use it with a condition.
Line 100 of the first file for example, there is :
- 15:08:57.978: Skipping module '../../obs-plugins/64bit/advanced-scene-switcher-lib.dll', not an OBS plugin
By the way I add a precision to my last bug report : it's not just only the "If scene has changed" but the whole "Scene" feature that bug as soon as I use it with a condition.
Warmuptill
Active Member
This is harmless and will not cause any issues.
Unfortunately, verbose logging is not enabled in either of the log files you have shared.
So at the moment I can't really spot any issue.
Can you please also export an example macro, which shows this issue, or save you settings to a file and share it with me?
I did an OBS update (several versions behind, liked some of what I was missing).
Specific to ASS, I thought it erased all the macros. The entire tray on the left was/is blank. I made another, then tried to remake one of the former ones. It tells me that I already have one with that name. I replicated its trigger condition and the desired effect happened.
I clicked into the tray wondering if they were just invisible/blank (like a lot of the buttons in OBS tend to be since ~30) but they're not there. I changed the theme but no effect; all the buttons still have no symbols on them. The new macro I made went right to the top, and it's the only one. I couldn't edit any of the others if I wanted to.
So, where'd they go? They exist, and they work. I'd like the list to be repopulated as making edits once in a while was a necessity.
Thank you for your time.
Specific to ASS, I thought it erased all the macros. The entire tray on the left was/is blank. I made another, then tried to remake one of the former ones. It tells me that I already have one with that name. I replicated its trigger condition and the desired effect happened.
I clicked into the tray wondering if they were just invisible/blank (like a lot of the buttons in OBS tend to be since ~30) but they're not there. I changed the theme but no effect; all the buttons still have no symbols on them. The new macro I made went right to the top, and it's the only one. I couldn't edit any of the others if I wanted to.
So, where'd they go? They exist, and they work. I'd like the list to be repopulated as making edits once in a while was a necessity.
Thank you for your time.
Warmuptill
Active Member
Which version of OBS and the advanced scene switcher are you using?
Can you share an OBS log file?
Found the script/ Thanks!
Dan_of_Earth
New Member
I've been experiencing a weird oddity that im wondering if anyone can help out with. I have all my scenes set up with their respective automations. There is one scene that i manually trigger from time to time, and whenever i do so, there is a flash of a whole other scene for like a single frame in the transition. Let's call them scene A, B, and C. When im on Scene B and i manually switch to scene C, there is one frame of scene A in the transition. i can't seem to figure out why.
Warmuptill
Active Member
Usually something like this is caused, if a new scene switch is triggered, while a previous one is still in progress.
I am not sure if this potentially applies to the macros you have set up however.
surgestone23
New Member
New User, installed plugin per instructions, Mac Sequoia M1 Pro - Crash happens when opening OBS
Warmuptill
Active Member
Unfortunately there is no indication of the advanced scene switcher even being loaded in the log you shared.
Do you have a crash log as well?
On MacOS this should be contained in the dialog window popping up informing you that OBS crashed.
In case you did not use the installer and manually placed the files in the corresponding directories please ensure to "sign" the files afterwards as described here:
Installation
An automation tool for OBS Studio. Contribute to WarmUpTill/SceneSwitcher development by creating an account on GitHub.
github.com
cdante100
New Member
Hi man, i've sended you some update about the bug
Hi there,
After updating to 1.31.0 (from 1.27.0) some "if statements" are not working. Specifically the ones I use to control one of my sound sources. Everything else seem to work perfectly, but the macros controlling audio level does not work, even after creating new ones.
I used them in the following way:
I had 4 marcos with if statements running together to govern the "audio configured volume" of my sound source, by looking at the "audio output level". Each macro would do something like the following:
If [output volume] exceeds (x)
And [configured volume] is exactly (y)
Then adjust [configured volume] to (73%)(this value changes based depending on (y))
These macros don't do anything anymore. As a side note the version I used did not have any fractions available for volume percentages, and could only be configured as percentage. V 1.31.0 can now be configured in either percentage or db, and percentage now has fractions available. I did double, triple an quadtriple checked that the volume levels match to the fraction perfectly stil with no success, not sure if the fractions are somehow causing this.
When I remove the "And [configured volume] is exactly (y)" part of the trigger works, but if Advanced scene Switcher does not know the current configured volume, it will not know which one of the 4 macros to fire.
Is there any known workaround for this? Or should I downgrade?
Also thank you so very much for this amazing plugin, such a lifesaver. Thank you for all the hard work <3
After updating to 1.31.0 (from 1.27.0) some "if statements" are not working. Specifically the ones I use to control one of my sound sources. Everything else seem to work perfectly, but the macros controlling audio level does not work, even after creating new ones.
I used them in the following way:
I had 4 marcos with if statements running together to govern the "audio configured volume" of my sound source, by looking at the "audio output level". Each macro would do something like the following:
If [output volume] exceeds (x)
And [configured volume] is exactly (y)
Then adjust [configured volume] to (73%)(this value changes based depending on (y))
These macros don't do anything anymore. As a side note the version I used did not have any fractions available for volume percentages, and could only be configured as percentage. V 1.31.0 can now be configured in either percentage or db, and percentage now has fractions available. I did double, triple an quadtriple checked that the volume levels match to the fraction perfectly stil with no success, not sure if the fractions are somehow causing this.
When I remove the "And [configured volume] is exactly (y)" part of the trigger works, but if Advanced scene Switcher does not know the current configured volume, it will not know which one of the 4 macros to fire.
Is there any known workaround for this? Or should I downgrade?
Also thank you so very much for this amazing plugin, such a lifesaver. Thank you for all the hard work <3
Last edited: